© 2016 Fabrication Maintenance Australia

ABRASIVE BLASTING

We provide both wet and dry hire of our customized mobile dustless blaster. Whether you want to do the job yourself or have us complete it for you, we have the solution.  The Dustless Blaster works by mixing water and abrasive inside the blast tank. By introducing water we’re drastically increasing mass and energy the machine is putting out, while drastically reducing dust.

We only use dustless blasting systems. Why?

  • Faster - Increased mass and no heat generation speeds up the stripping process especially with powder coat and epoxy paints.

 

  • Minimal Dust - The abrasive gets trapped in water and grounded, eliminating the plume of dust.

  • Lower Abrasive Consumption - The Dustless Blaster uses use less media to do more work.

  • Increased safety for Workers - Drastically reduced rebound of spent media and your choice of quality approved abrasives.

  • Less Containment Needed - In most cases, expensive, time consuming containment does not need to be set up. Shade cloth works very well to capture water vapour.

  • Doesn’t Affect Nearby Workers - Never sacrifice productivity, other workers can work nearby unaffected

  • No Warping - The water prevents friction and won’t warp or harden metal like sandblasting can. Even without heat some metals will warp from pressure alone.

 

See our short video demonstrating just how easily and quickly the our blaster gets the job done to a high standard.

DB500 Dustless Mobile Blaster

High quality machine geared for greater ease of use and optimum performance. A modern eco friendly sandblasting dustless machine, for personal and environmental safety.


4 wheel electric braked trailer- well balanced trailer tows extremely well.
All additional parts and tools on board
2 x200 Litre water tanks and pneumatic pump on board
DB500 Blast Pot - over an hour work time before refill is required
80 hp 5 cyl Diesel John Deere powered Compressor- dedicated high pressure machine (Sullair 210H ) up to 150 psi continuous
Aftercooler installed for clean dry air

Sandblasting can be used on numerous materials including:

  • Aluminum/Steel boats

  • Steel structures/frames

  • Mechanical equipment or heavy machinery

  • Concrete driveways or pathways

  • Powder coat, paint and rust removal

      And much more!

Talk to us today about sandblasting/abrasive blasting in Gladstone local, Wide Bay and Central Queensland regions.

Check us out on youtube 

  • Black YouTube Icon
1/3